This is a development site for cognisys-inc.com.  If you find yourself here please visit our production site.

My Cart
My Account

StopShot Water Drop Photography Kit

$399.00
Rating:
100 % of 100
In stock
SKU SS_WVK_01

This kit contains everything you need to capture photographs of water drops and water drop collisions. The kit includes the following.

  • StopShot controller
  • High Precision Water Valve with matched nozzle
  • Mariotte Siphon
  • Mini Beam Sensor and mounting hardware
  • Tripod mountable bracket for holding the siphon and water valve up
  • Power supplies for both the Water Valve and StopShot
  • PC to RCA Cable
  • 6ft RCA cable

The mounting hardware for this kit is all made from flat black anodized aluminum. The main bracket is 12" (305mm) long and has three tapped holes for a 1/4-20 tripod mount.

- +
Features

About the StopShot - High Speed Photography Controller

StopShot is a flexible timing module made specifically for taking high speed photographs. With StopShot you can create photos like you see below without having a degree in electrical engineering. All you need is a camera with the BULB exposure setting, an external flash, and the StopShot electronic trigger module. With StopShot you can use a variety of triggers to fire up to three independent electronic devices (flashes, cameras, valves, etc.) at virtually any delay you choose. You can even set it up to do time lapse photography. Follow the How To links below for more details.

Strawberry n Cream - Copyright 2012 Amer Pederson
Sound Activated
StopShot Water Drop Kit
Water Drops
Photograph Insects in Flight
Insects In Flight
Ballistics Photography with StopShot
Ballistics
Timelapse with StopShot
Time Lapse
Bristlecone Star Trails Copyright Roy Dunn
Star Trails

StopShot Features:

  • Fully programmable 3 channel camera trigger for high speed photography.
  • Trigger up to 3 external devices including: flashes, cameras, water valves, solenoids, or any other low voltage electronic device.
  • Several flashes can be fired simultaneously from one Trigger - check out the Flash Splitter.
  • Easy to read 4x20 LCD Display with adjustable back-lighting.
  • StopShot will save your settings between power cycles. No lost setup info.
  • Programmable to perform sequential triggering for complicated triggering sequences.
  • Timers can be adjusted to be manual (on button press), sequential, or event based.
  • Timers can be configured to ignore trigger events for a programmable amount of time (blanking time).
  • Time Lapse Photography Mode.
  • Sound activated triggering. Just add the microphone.
  • Adjustable gain for microphone or analog sensors.
  • Sensor input will accept digital or analog input.
  • Laser power can be turned off after trigger to keep laser light out of photos.
  • Long exposure control of shutter for night-time or astro-photography.
  • One touch Shutter lag measurement capability.
  • Each trigger can generate multiple pulses, great for multiple drops or multiple exposures.
  • Camera "Sync" mode to make synchronizing the flash with your camera's shutter easier.
  • Up to 10 presets for user stored settings. Give your setup's custom names and store them for later use.
  • Auto Increment - A programmable auto increment time increases trigger delay for every event.
  • Sequential mode timeout for taking pictures with an unattended camera.
  • Simple 4 button interface.
  • Durable extruded aluminum housing.

Reviews 2
Write Your Own Review
You're reviewing:StopShot Water Drop Photography Kit
Your Rating
FAQs

Top Customer Questions and Answers (FAQ)

Is it ok to use other fluids in the system other than water?
Yes, a big part of water drop photography is water chemistry. Adding coloring or thickeners to the water is not a problem and often adds a lot to the end results. Using other liquids like milk is also fine but a good thorough flushing is recommended after use. We would however recommend you stay away from solvents with any type VOC's.
Do you have any water drop tutorials or videos?
Yes, you can find 5 pages of water drop tutorials starting here, as well as wiring diagrams for connecting multiple flashes. The tutorials start off with basics and end with very advanced 3 valve techniques.
Can I automate the entire process and have StopShot fire the camera as well as the flash and water drops?
Absolutely, but you will need a shutter interface cable to fire your camera. This cable goes between the StopShot output and the camera remote shutter port. For water drop photography we generally recommend you start off in a darkened room with StopShot firing the water valve and flashes and controlling the camera manually in bulb mode. Setup without the camera is much easier and will let you get up and running taking images of water drops much quicker. Once you understand the timing and settings of StopShot add controlling the camera into the mix.
My water valve has become clogged or has a slow leak - what should I do?
If your valve develops a slow leak or the slow becomes restricted it likely just needs a good cleaning. Try purging the water valve by holding down the "DOWN" button on StopShot and if this doesn't work you can find teardown and cleaning instructions here.
Have additional questions about ordering and shipping?
Visit our general FAQ page.
Specs
Specifications MIN NOM MAX UNITS
Input Voltage 6 7.5 14 Vdc
Input Current- No sensors (9Vdc in) - 75 100 mAdc
Output Current Sink - - 1 Adc
Sensor Supply Output Voltage 4.0 4.5 5.0 Vdc
Sensor Supply Output Current - - 100 mAdc
Max Voltage on Trigger Out Port (Steady State) - - 60 Vdc
Timer Tolerance @25C (Standard Module) - 1 - %
Timer Tolerance @25C - 50 - Ppm
Operating Temperature -20 25 50 C

• Fully programmable 3 channel intervalometer.
• 4x20 LCD Display with adjustable blue backlighting.
• Powered by a high-speed Freescale Digital Signal Processor
• All outputs are open drain (Can be used for Flash Trigger or Shutter Trigger).
• Microphone Input for standard electret microphone.
• Input sensor jack with external power for IR LED's, Lasers or other 5Vdc loads.
• Outputs have enough current capability to energize relays or electronic valves (Outputs
are protected from inductive loads).
• All outputs short circuit protected.
• Accepts DC Input 2.1mm power jack.
• Simple 4 button interface.
• Adjustable gain for microphone and sensor inputs.
• Standard 3.5mm microphone jack.
• RCA output cables (easy and affordable to extend).
• Durable extruded aluminum housing

Support

StopShot Resources

Owner's Manual (select language)

Owner's Manual (PDF)

StopShot in the News

StopShot in Popular Photography
How To

+
AC Adapter 12V 1A
+
Mini Beam Sensor
+
PC to RCA Adapter Cable
+
RCA Cable
+
Water Valve Assembly
+
StopShot Controller

Accessories

Water Drop Accessories:


You May Also Be Interested In: