Connecting Sabre

Connecting Sabre to the Camera

Shown below is the connection diagram to connect the Sabre to your camera. The same cable is used to supply external power and charge the internal battery. The Sabre is supplied with a 12V 1A power supply that will both supply power to the Sabre and charge the internal battery.

Sabre Replacement Cable

Sabre Replacement Cable

$29.00

Detail

Shutter Interface Cable (RCA)

3.5mm Shutter Cable - This cable is included with the Sabre. Choose the cable you need from the list on the Sabre product page. If you need cables for additional cameras the 3.5mm shutter cables are here

AC Adapter 12V 1A

12V 1A AC Adapter - Included with Sabre - Choose country code from the list on the Sabre product page.

Adapting Sabre to other Shutter Interface Cables

If you want connect Sabre to your a shutter interface cable that has a 2.5 mm connector we have adapters available. We also have adapters to shutter cables that are compatible with StopShot and StackShot (RCA / Cinch connectors).

3.5mm to RCA adapter

3.5mm to RCA adapter

$4.99

Detail

3.5mm to 2.5mm Adapter

3.5mm to 2.5mm Adapter

$4.99

Detail

Sabre - Dual Beam

If you want to use your Sabre Sensors in a dual beam configuration set them up as shown to the left. We have extension cables available in the store if you need more than 2m between the sensors.